Monday, July 9, 2012

Masonry Veneer Manufacturers Association – 1 – July 24, 2009
750 National Press Building, 529 14th Street, N.W., Washington, DC 20045
www.masonryveneer.org
TECHNICAL BULLETIN
Water Penetration Testing of an
Adhered Masonry Veneer Wall Assembly Installed Over
Rainscreen Systems
INTRODUCTION
This investigation explored the effect of simulated winddriven
rain conditions on several wall assemblies related
to adhered masonry veneer cladding installed over a
rainscreen system. For the purposes of this study a
rainscreen is defined as: a construction technique or
rainscreen product that creates a capillary break/air
space between the cladding and the primary water
resistive barrier. The assemblies tested the “field of the
wall”. The parameters investigated were water-resistive
barrier (WRB) of #15 felt combined with commercially
available rainscreen systems.
The testing protocol was to evaluate wall assembly
performance with WRB, five different rainscreen systems,
lath, and a mortar scratch coat layer. The intent was to
show that the addition of a rainscreen system does not
negatively affect test results, and compare the results to
similar testing by MVMA without the rainscreen systems
incorporated into the wall assembly. The testing
ultimately demonstrated the combination of WRB,
rainscreen, lath, & scratch coat was effective at
preventing water penetration.
EXPERIMENTAL APPROACH read more 
Posted by Instone for your information 

1 comment:

Jackie Champion said...

Hey there! Thank you for sharing your thoughts about masonry in your area. I am glad to stop by your site and know more about masonry. Keep it up! This is a good read. You have such an interesting and informative page. I will be looking forward to visit your page again and for your other posts as well.
CMUs can be manufactured to provide a variety of surface appearances. They can be colored during manufacturing or stained or painted after installation. They can be split as part of the manufacturing process, giving the blocks a rough face replicating the appearance of natural stone, such as brownstone. CMUs may also be scored, ribbed, sandblasted, polished, striated (raked or brushed), include decorative aggregates, be allowed to slump in a controlled fashion during curing, or include several of these techniques in their manufacture to provide a decorative appearance.
Whether you have a specific design in mind, or are just looking to spruce up your property in general, our professional services can help. From small jobs to large projects, residential designs and commercial layouts, we do it all.

Masonry Pembroke